TTDS8 DCC Signal Caution Shunting Class_Class 319 Smoke box top mounted lamp

Smoke box top mounted lamp bracket

1 x K20-030 (Ground Level 64mm Straight Track)

Out of the fruit season they were often used as parcel or freight vans and later when their use was eclipsed by road transport most were permanently converted to parcel or store use

Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit

TTDS8 DCC Signal Caution Shunting Class_Class 319 Smoke box top mounted lampColour light signal based on the signals used on modern railways. These signals are quick and easy to install and do not require any soldering. These signals are pre built and just need to be inserted into the track using the two prongs attached to the signal. If you have already laid your track, you can add wires to them rather than using the prongs. Be sure to read the instructions carefully before attempting to set up this signal. LED COLOURS 1 x